Datasheet

ManualsBrandsTelemecanique Sensors ManualsInductive SensorsInductive Sensor 1.5mm PNP, Break Contact 200mA

Product data sheet

Characteristics

XS508B1PBL2

inductive sensor XS5 M8 - L33mm - stainless -

Sn1.5mm - 12..24VDC - cable 2m

Main

Range of product OsiSense XS

Series name General purpose

Sensor type Inductive proximity sensor

Device application -

Sensor name XS5

Sensor design Cylindrical M8

Size 33 mm

Body type Fixed

Detector flush mounting acceptance Flush mountable

Material Metal

Type of output signal Discrete

Wiring technique 3-wire

[Sn] nominal sensing distance 1.5 mm

Discrete output function 1 NC

Output circuit type DC

Discrete output type PNP

Electrical connection Cable

Cable length 2 m

[Us] rated supply voltage 12...24 V DC with reverse polarity protection

Switching capacity in mA <= 200 mA DC with overload and short-circuit protection

IP degree of protection IP67 conforming to IEC 60529

Complementary

Thread type M8 x 1

Detection face Frontal

Front material PPS

Enclosure material Nickel plated brass

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

Jul 24, 2019

Summary of content (7 pages)

PAGE 1
XS508B1PBL2 Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications inductive sensor XS5 M8 - L33mm - stainless Sn1.5mm - 12..
PAGE 2
Operating zone 0...1.2 mm Differential travel 1...15% of Sr Cable composition 3 x 0.11 mm² Wire insulation material PvR Status LED 1 LED (yellow) for output state Supply voltage limits 10...36 V DC Switching frequency <= 5000 Hz Voltage drop <= 2 V, closed state Current consumption <= 10 mA (no-load) Delay first up <= 10 ms Delay response <= 0.1 ms Delay recovery <= 0.1 ms Marking CE Threaded length 25 mm Height 8 mm Length 33 mm Product weight 0.
PAGE 3
Product data sheet Dimensions Drawings XS508B1PBL2 Dimensions (1) LED 3
PAGE 4
Product data sheet Mounting and Clearance Minimum Mounting Distances Side by side e (1) ≥ 3 mm/0.12 in. Face to face e (2) ≥ 18 mm/0.71 in. Facing a metal object e (3) ≥ 4 4.5 mm/0.18 in.
PAGE 5
Product data sheet Mounting and Clearance XS508B1PBL2 Mounting (1) Bending cable: 4 x external cable diameter 5
PAGE 6
Product data sheet Connections and Schema Wiring Schemes PNP BU : BN : BK : 6 Blue Brown Black XS508B1PBL2
PAGE 7
Product data sheet Performance Curves XS508B1PBL2 Performance Curves Standard Steel Target : 8x8x1 mm (1) (2) (y) Pick-up points Drop-out points (object approaching from the side) Sensing distance in mm 7