Datasheet

ManualsBrandsTelemecanique Sensors ManualsInductive SensorsInductive Sensor 2mm PNP, Make Contact (NO) 200mA

Product data sheet

Characteristics

XS512B1PAL2

inductive sensor XS5 M12 - L35mm - brass -

Sn2mm - 12..24VDC - cable 2m

Main

Range of product OsiSense XS

Series name General purpose

Sensor type Inductive proximity sensor

Device application -

Sensor name XS5

Sensor design Cylindrical M12

Size 35 mm

Body type Fixed

Detector flush mounting acceptance Flush mountable

Material Metal

Type of output signal Discrete

Wiring technique 3-wire

[Sn] nominal sensing distance 2 mm

Discrete output function 1 NO

Output circuit type DC

Discrete output type PNP

Electrical connection Cable

Cable length 2 m

[Us] rated supply voltage 12...24 V DC with reverse polarity protection

Switching capacity in mA <= 200 mA DC with overload and short-circuit protection

IP degree of protection IP68 double insulation conforming to IEC 60529

IP69K conforming to DIN 40050

Complementary

Thread type M12 x 1

Detection face Frontal

Front material PPS

Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications

Jul 24, 2019

Summary of content (7 pages)

PAGE 1
XS512B1PAL2 Product data sheet Characteristics Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications inductive sensor XS5 M12 - L35mm - brass Sn2mm - 12..
PAGE 2
Enclosure material Nickel plated brass Operating zone 0...1.6 mm Differential travel 1...15% of Sr Cable composition 3 x 0.34 mm² Wire insulation material PvR Status LED 1 LED (yellow) for output state Supply voltage limits 10...36 V DC Switching frequency <= 5000 Hz Voltage drop <= 2 V, closed state Current consumption <= 10 mA (no-load) Delay first up <= 10 ms Delay response <= 0.1 ms Delay recovery <= 0.
PAGE 3
Product data sheet Dimensions Drawings XS512B1PAL2 Dimensions (1) LED 3
PAGE 4
Product data sheet Mounting and Clearance Minimum Mounting Distances Side by side e (1) ≥ 4 mm/0.16 in. Face to face e (2) ≥ 24 mm/0.94 in. Facing a metal object e (3) ≥ 4 6 mm/0.24 in.
PAGE 5
Product data sheet Mounting and Clearance XS512B1PAL2 Mounting (1) Bending cable: 4 x external cable diameter 5
PAGE 6
Product data sheet Connections and Schema Wiring Schemes PNP BU : BN : BK : 6 Blue Brown Black XS512B1PAL2
PAGE 7
Product data sheet Performance Curves XS512B1PAL2 Performance Curves Standard Steel Target : 12x12x1 mm (1) (2) (y) Pick-up points Drop-out points (object approaching from the side) Sensing distance in mm 7