Datasheet

2
1
3
4
5
6
7
8
9
10
5/39
Photo-electric sensors 1
OsiSense XU, general purpose, single mode function
Compact design, 50 x 50
Five-wire AC or DC, 1 CO relay output
Three-wire DC, solid-state output
Characteristics
Sensor type XUK pppppM12 XUK pppppL2
Product certications UL, CSA, e
Connection M12 connector Pre-cabled, length: 2 m
Sensing distance
nominal Sn / maximum
(excess gain = 2) (excess gain = 1)
m
PNP/NPN or relay output 1 / 1.5 diffuse
m PNP/NPN or relay output 5 / 8 polarised reex
m PNP/NPN or relay output 7 / 10 reex
m PNP/NPN or relay output 30 / 45 thru-beam
Type of transmission Infrared, except polarised reex (red)
Degree of protection Conforming to IEC 60529 IP 65, double insulation i
Storage temperature °C - 40…+ 70
Operating temperature °C - 25…+ 55
Materials Case PBT
Lens PMMA
Cable – PVC
Vibration resistance Conforming to IEC 60068-2-6 7 gn, amplitude ± 1.5 mm (f = 10 to 55 Hz)
Shock resistance Conforming to IEC 60068-2-27 30 gn, duration 11 ms
Indicator lights Output state Yellow LED (except for XUK 2ppppppT)
Supply on Green LED (only for XUK 2ppppppT)
Rated supply voltage PNP/NPN V 12…24 with protection against reverse polarity
Relay output V – z 24…240
Voltage limits (including ripple) PNP/NPN V c 10…36
Relay output V – z 20…264
Current consumption, no-load PNP/NPN mA y 35
Power consumption Relay output W – z 2
Switching capacity PNP/NPN mA y 100 with overload and short-circuit protection
Relay output A – z 3
Voltage drop, closed state V y 1.5
Maximum switching frequency PNP/NPN Hz 250
Relay output Hz – 20
Delays First-up ms < 15 (PNP/NPN); < 60 (relay output)
Response ms < 2 (PNP/NPN); < 25 (relay output)
Recovery ms < 2 (PNP/NPN); < 25 (relay output)
Wiring schemes
M12 connector Pre-cabled, PNP/NPN Receiver, PNP output Thru-beam transmitter c
3 (-)
1 (+)
4 OUT/Output
2 Beam break input
(1)
See connection on page 9/44.
(1) Beam break input on thru-
beam transmitter only.
(-) BU (Blue)
(+) BN (Brown)
OUT/Output BK (Black)
Beam break input (1) VI
(Violet)
Input 2/VI:
- not connected: beam made
- connected to –: beam broken
Pre-cabled, relay output Receiver, NPN output Thru-beam transmitter z Relay output
(z) BU (Blue), (z) BN
(Brown)
Relay common/GY (Grey)
NO BK (Black)
NC WH (White)
Detection curves
Thru-beam system Polarised reex system Reex system
Diffuse system
Dimensions
XUK pppppL2 XUK pppppM12
Object: 10 x 10 cm,
1: white 90%, 2: grey 18%
Possible orientation of elbowed connector
1 2
4 3
1 2
4 3
–
BN/1
BU/3
+
PNP
BK/4 (NO,NC)
–
BN/1
BU/3
+
PNP
BK/4 (NO,NC)
1
3
2
BN
VI
BU
1
3
2
BN
VI
BU
BN/1
BU/3
+
–
BK/4 (NO,NC)
NPN
BN/1
BU/3
+
–
BK/4 (NO,NC)
NPN
BN
BU
GY
WH
BK
BN
BU
GY
WH
BK
WithreectorXUZC50WithreectorXUZC50
WithreectorXUZC50WithreectorXUZC50
1,5
0,8
0,5 1,5
0,8
0,5
7 4
50
6,5
7 4
50
6,5
66
20
20
76 84
66
20
20
76 84
Characteristics,
schemes,
curves,
dimensions