Datasheet
Product datasheet
Characteristics
XXS18S1AM12
Ultrasonic sensor cylindrical M18
-
Sn=1m
-
analog 4
-
20mA
-
SYNC
- connector M12
Main
Range of product
OsiSense XX
Sensor type
Ultrasonic sensor
Series name
General purpose
Sensor name
XXS
Sensor design
Cylindrical M18
Detection system
Diffuse
[Sn] nominal sensing distance
1 m adjustable with remote teach push-button
Material
Metal
Type of output signal
Analogue
Wiring technique
5-wire
Analogue output function
4...20 mA
[Us] rated supply voltage
12...24 V DC with reverse polarity protection
Electrical connection
Male connector M12 5 pins
[Sd] sensing range
0.105...1 m
IP degree of protection
IP67
IP65 conforming to IEC 60529
Complementary
Enclosure material
Stainless steel 316L
Front material
Epoxy
Rubber
Resin
Supply voltage limits
10...30 V DC
Function available
With synchronisation mode
Software configurable
[Sa] assured operating distance
0.105...1 m (teach mode)
Blind zone
105 mm
Transmission frequency
200 kHz
Repeat accuracy
0.1 %
Deviation angle from 90° of object to be detected
-7...7 °
Minimum size of detected object
Cylinder diameter 1 mm at 600 mm
Status LED
1 LED (yellow) for output state
1 LED (green) for echo state
Current consumption
30 mA
Maximum switching capacity
250 Ohm with 12 V DC overload and short-circuit protection
850 Ohm with 24 V DC
Voltage drop
<= 2 V
Setting-up
Teach mode
Delay first up
<= 180 ms
Delay recovery
<= 100 ms
Marking
CE
Threaded length
45 mm
Height
18 mm
Width
18 mm
Depth
64 mm
Product weight
0.05 kg
Environment
The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
1 / 4