User's Manual

Section 7 - Programming (Continued)
64
The respective screens appear as shown below (the 10K
screen is shown first):
The following next three sections of this programming
guide are written specifically for each of the three
system configurations. They are in order of 10K, 9000(1)
and 9100(1). Please skip to the appropriate section for
your system. Do this in turn for each Bank until all
desired Banks are programmed.
System 9000(1) Freq A
Setup Bank #
A1
Receiver access code
1
0
Auto Turn Off
Timer None
Save
Cancel
9000 and 9001 Programming Screen
System 9100(1) Freq A
Setup Bank #
A1
Receiver access code
1
0
Auto Turn Off
Timer None
Save
Cancel
9100 and 9101 Programming Screen
This section appears
for 2-Speed only.
10K Programming Screen
System 10K Freq AK01
Setup Bank #
A1
Receiver access code
1
0
B1
1
0
Multibox Tx # 1
Auto Turn Off Auto Alarm
S3-1
1
0
Timer
Switch conf.: H,T,B
Main/Aux Aux
Save
Cancel
Mode A0
This appears for 9100
Single-Speed only.