Supported Devices: v4.1 for AT&T 8125, 8525 Users Guide User guide

© TELENAV 2003-6 PAGE 11 OF 32
When the Pocket PC reaches the TeleNav servers with a valid and active phone
number and PIN, the device will be registered to use TeleNav, and will not
present any of the above screens except the splash screen in the future.
Visiting www.telenav.com, and changing the PIN will require you to repeat the
above registration process.
TeleNav Bluetooth GPS Configuration
The GPS location information is provided by a TeleNav Bluetooth GPS receiver;
therefore you must configure the GPS receiver before you can access
information that is dependent upon GPS information in TeleNav.
Make certain that your TeleNav Bluetooth GPS receiver is powered ON at this
point during the setup. Press Yes to configure the settings. A scan of all nearby
devices will be completed and a list will be displayed. Highlight the TeleNav
GPS option and press the center OK button to continue.
If you do not see the GPS device, verify that the device is on and click on the
search button to search for it again.