Supported Devices: v5.5 for BlackBerry smartphones Owner manual

The following section contains an example of what you might hear and say when using the Call In option for

entering an address (the prompts are different if you chose Search menu >> Speak It):

TeleNav GPS Navigator prompt> Thank you for calling TeleNav! Please say the 5 digit ZIP, or the city and

state. For a Canadian address say the city and province.

Your response> Arlington, Texas

TeleNav GPS Navigator prompt> I heard Arlington, Texas. Say GO BACK if this is not correct. <pause> Say

the street including both the number and name, like 422 Main Street. <pause> It can also be a highway.

Your response> 1620 Oak Street

TeleNav GPS Navigator prompt> I heard 1620 Oak Street. Say GO BACK if this is not correct. <pause>

Great, your destination is saved in you recent stop list: 1620 Oak Street, Arlington, Texas 75210 You can

hang up now and launch TeleNav on your phone or stay on the line to start over for another destination.

The Voice Address Input System may ask you for an account number and PIN if caller ID is not working. Simply

dictate the numbers as prompted, or key in your mobile phone number followed by pressing “#” and your TeleNav

PIN followed by pressing “#.“

The recognition system may reply back with an incorrectly recognized input. When this happens, simply say, “Go

Back” and repeat the data entry. The voice system may advise you that a street number is out of range and

provide the proper range of numbers for you to use. Provide a number that is within the range or nearest the end of

the range that you are sure is valid.