Supported Devices: v5.5 for BlackBerry smartphones Owner manual

• Delay – Total time delay caused by traffic conditions, or the sum of delays on each segment.

NOTE: Delay refers only to the route currently shown.

• Go – Distance until next turn.

NOTE: This is not the distance from the origin but the length of each road segment.

• Street – The street or highway name of the road segment.

• Mph/Kmph – Average speed on that road segment.

NOTE: “N/A” is displayed for segments without traffic flow information (usually local streets) or segments

farther than 200 miles away.

If you click on an incident line, you can view the details. Below is an

explanation of what you will see on the Traffic Detail screen:

• Delay – The additional time it will take to travel the segment

as compared with the time it would take if traveling at the

posted speed.

• Travel Time – Estimated time it will take to travel the

segment.

• Slowest Speed – Slowest speed observed on the

segment.

• Average Speed Bar – Average speed of a segment on a

scale of 0 to the maximum-posted speed for that segment.

• Incident Detail – Each incident is displayed with the

following:

-Incident icon color-coded by severity

-Location

-Additional comments

NOTE: If there is no flow information for a segment, the Average Speed

bar on the Details page is grayed out.