User's Manual

LLT173 01 18 May 2010 Page 6 of 9
QP4016 07- Tech Note Template
5 Installation Instructions
Instructions for the installation of each of the different variants of Telecell are given below. Figure 1
shows a wiring diagram for a standard lamp with a non-dimmable ballast. Figure 2 shows the case where
there is a dimmable ballast and a dimming control module (TDM-A) is included.
5.1 NEMA Telecell
Insert unit into NEMA socket on street light ensuring the largest tab on the unit places into the largest tab
on the NEMA receptacle on the street light. Turn by hand applying slight force.
5.2 Conduit Telecell
Remove the large nut on the base of the Telecell and insert the Telecell into the hole at the top of the
luminaire. Fasten the nut to hold the Telecell in place and connect the power cables as shown in Figure 1/
Figure 2.