Operation Manual

Installing the TELES.iTA/2TR Box
© 1998 by TELES AG Berlin, Version 1.30/iTA-eu/f/8.02 Issue: June 1998 Page 7
3.2.3 Setting Service Indicator for Outgoing Calls
The TELES.iTA/2TR Box and thus all terminal devices attached to it accept calls for all ana-
log service indicators. Outgoing calls use the service indicator ‘telephony analog’. Thus it
should be possible to establish connections to most usual terminal devices.
Problems can arise for some fax machines attached to PBXs
when they accept only calls that have the fax group 3 service
indicator. In this case, you can adapt the service indicator of
the fax machine’s port.
Enter the following command sequence:
04 PINtype#
Example: To set ‘fax group 3’ (type 4) for the current port, enter:
04 012344#
NOTE: The service indicators ‘Telephony option 1 and 2’ are intended for PBXs that do
not accept ‘Analog call’ or ‘ISDN Telephony’.
Type Function in DSS1
1 ISDN telephony
2 Analog telephony
3 Fax Group 2
4 Fax Group 3
5 Telephony option 1
6 Telephony option 2