Operation Manual

Configuring TELES.iTA/2TR Box Functions

5 Configuring TELES.iTA/2TR Box Functions

Aside from the standard configurations, the TELES.iTA/2TR Box offers the following special

functions:

❑ Call Forwarding

❑ Personal CallBack

5.1 Call Forwarding

If a device is temporarily not available, you can forward the call to another number. The

TELES.iTA/2TR Box supports unconditional call forwarding. All incoming calls will be

routed immediately to the new device. The device originally called will not ring. Call for-

warding can be activated in the following ways:

❑ By entering the source number and the destination number, i.e., the number to which

calls will be forwarded (command 06).

❑ By entering only the destination number. In this case, the source number is the call

number of the device from which the call forwarding function is activated (command

07).

❑ By making the other TR port of your TELES.iTA/2TR Box the destination call number.

The call forwarding function can be activated or deactivated at any time (command 08).

5.1.1 Setting Call Forwarding with Source and Destination

Determine which TR port of the TELES.iTA/2TR Box should forward calls to which destina-

tion number.

To set call forwarding, enter the following command sequence:

06 PINSource numberDestination number#

The source number should be the number that you assigned to the device using the command

sequence: 



01



PIN



Call number#.

Example: All calls to the number 33220 are to be forwarded to the destination number 33221.

Your PIN is 01234. You would enter:

06 0123433220 33221#

To disable the function, enter the command sequence without a destination number.

Example: Call forwarding for the call number 33220 is to be disabled. Your PIN is 01234.

You would enter:

06 0123433220 #