Operation Manual

Configuring TELES.iTA/2TR Box Functions

5.1.2 Setting Call Forwarding with Destination only

Using this method, you set call forwarding without entering the source number. Calls will be

forwarded from the port at which you are activating the function. This function is not avail-

able, of course for remote administration.

Enter the command sequence:

07 destination number#

Example: All incoming calls are to be forwarded to the destination number 33221. You

would enter:

07 33221#

To forward a call to a device on the other TR port, you enter its port number:

07 TR port number #

Example: Your telephone is attached to port 1 and you would like to forward all calls to the

port 2. You would enter:

072#

5.1.3 Deactivating Call Forwarding

You can temporarily deactivate the currently active call forwarding function (command 07)

by entering the command sequence:

08 0#

5.1.4 Reactivating Call Forwarding

To reactivate call forwarding (command 07), you would enter:

08 1#

NOTE: This will only work if call forwarding was previously set and deactivated.