Operation Manual

Configuring TELES.iTA/2TR Box Functions

5.2.3.2 Deleting

To delete just a single CB number, enter a command sequence containing only the CB code

without CallBack number.

8x PINCB code x  #

Example: You wish to erase the third CB number. You would enter:

83 0123498765 #

To delete a CB code and number, enter a command sequence containing only the CB ID

without CallBack code and number.

8x PIN #

Example: You wish to erase the third CallBack. You would enter:

83 01234#

5.2.4 Deleting Personal CallBack Destination Numbers

All CB codes and CallBack numbers can be deleted by entering a command sequence. The

Personal CallBack Server is then disabled and can no longer be used. To delete all CB codes

and their respective CallBack numbers, enter the command sequence listed below:

89 PINPIN#

Example: You wish to erase all the CB codes and CallBack numbers. Assuming your PIN is

01234, you would enter:

89 0123401234#

5.2.5 Changing Callback Number for existing CallBack Code

In case a caller needs to make a call from a different telephone, he or she can change the

CallBack number from any telephone. This feature is intended for callers who call from vari-

ous different locations. In order to change the CallBack number you must know its CB code.

To change the number, enter the following command sequence:

87 CB CodeCallBack number#

Example: Your code is 98765 and you want to change the CallBack number to 030 222233.

You would enter:

87 98765030 222233#

NOTE: You can only change a CallBack number for a code that was previously config-

ured.