Operation Manual

Configuring TELES.iTA/2TR Box Functions

5.2.6 Making a Personal CallBack Call

This function activates the Personal CallBack Server so that it calls the number assigned to

the CB codes.

To have the Personal Call Back Server return your call, enter:

99 CB Code#

Example: The following numbers have been set using the setting commands (see sections

5.2.2 and 5.2.3): the access number for the TELES.iTA/2TR Box Personal CallBack Server is

33445567, your CB code is set to 98765 and the telephone number of the device from which

you are calling is 030 222222.

1. Call the CallBack Server by

dialing 33445567.

2. The CallBack Server sends a

dial tone.

3. Initiate the return call by en-

tering the code 



99



98765#.

4. Listen for confirmation tone

and then hang up.

5. The Personal CallBack Server

will then return your call by

calling 030 222222. After an-

swering the call, you will hear

the dial tone of the public line

available to you. You may dial

the desired number now. In

case the TELES.iTA/2TR Box

is part of a PBX, you may have

to dial for outside access.

If you would like to make several

calls using the Personal CallBack

Server, do not hang up after fin-

ishing your first call. Simply press

the 



 # keys to terminate the call.

You will remain connected to the Personal CallBack Server; you will hear the dial tone

shortly thereafter so that you can make the next call.

During a Personal CallBack connection, you cannot use any devices attached to the

TELES.iTA/2TR Box. If someone picks up the receiver of the phone attached to port one, all

three parties will hear a signal, and the person on port 1 will be connected to the caller. The

party called will be put on hold until the party on port 1 hangs up.