Operation Manual

Configuring TELES.iTA/2TR Box Functions
Page 24 © 1998 by TELES AG Berlin, Version 1.30/iTA-eu/f/8.02,Issue: June 1998
5.5 Summary of TELES.iTA/2TR Box Functions
On the following page, you will find a table containing all available TELES.iTA/2TR Box
functions. The table is divided into 8 columns. The columns have the following meaning:
Column Heading Contents
1
An X indicates that the function applies only to a single TR port. To configure
both ports, you must perform the configuration for each port separately.
Function
Name of the function.
Command sequence
Key combination you must enter to set the function. This can only be carried
out on a touch-tone telephone. All command sequences begin with
 and
end with #.
Example
An example command sequence is shown. All examples use the PIN (Per-
sonal Identification Number) 01234
Explanation
Short description of the function and the example.
2
Factory settings for the TELES.iTA/2TR Box.
3
An X indicates that the function can be configured directly at a device at-
tached to the TELES.iTA/2TR Box.
4
An X indicates that the function in this column can be configured by an exter-
nal device (remote administration)
. For details see section 5.3.