Operation Manual
1 Function Command
sequence
Example Explanation 2 3 4
X Call numbers for the TR
ports
*01*PIN*number# *01*01234*335561# Sets the call numbers for the TR ports. If a number is not con-
figured, the port will answer all incoming calls. The call number
is now set to 335561.
No
number
X
Access number for Per-
sonal CallBack
*02*PIN*number# *02*01234*335562# Sets the access number for the Personal CallBack Server and
for remote administration. The access is now set to 335562.
No
number
X
Call forwarding setting
*06*PIN*source no.*
destination no.#
*06*01234*335561*
030 223360#
Forwards a call from the source number to the destination
number. If no destination number is entered, call forwarding is
disabled. The source number must be the number of a device
attached to the TELES.iTA/2TR Box.
Off X X
X Call forwarding to des-
tination number
*07*destination no.# *07*0302233# Forwards calls from the current number to the destination num-
ber. Instead of entering an external number, you can enter the
alternate TR port number. Calls are now forwarded to 030 2233
No
number
X
X Call forwarding off/on
*08*0|1# *08*0# Deactivates or activates call forwarding which was set by the
command sequences 06 and 07. In the example, call forward-
ing is deactivated.
Off X
X Changing gain of TR
port signals
*09*1|2# *09*3# Changes the TR port signal gain. The higher the digit, the
louder the volume. The port is now set to the loudest setting.
2X
Setting CB codes and
CallBack numbers
*81|82|83|84|85* PIN
[*CB code*number]#
*81*01234*98765*0
30 223360#
Sets the CB code and the CallBack number. You can set up to
5 codes. In the example, the CB code is set to 98765 and the
CallBack number 030/223360.
No
numbers
XX
Changing CallBack
numbers
*87*CB code*new
no.#
*87*98765*030
223361#
Changes the CallBack number assigned to a particular CB
code. The number is changed to new no. In the example, the
new CallBack no. 030/22 33 61 is assigned to the CB code
98765.
Empty X X
Deleting CallBack no.
*89*PIN*PIN# *89*01234*01234# Deletes all CallBack numbers and CB codes X X
Changing your PIN
*90*oldPIN*newPIN
*newPIN #
*90*00000*0123*01
234#
In the example, your PIN is being change from 00000 to 01234. 00000 X X
Device ID (1 - 8)
*92*PIN*digit# *92*01234*2# If you want to operate several TELES.iTA/2TR Boxes on a sin-
gle ISDN line, you must assign each box a unique device ID. In
the example, the device ID is set to the ID 2.
1
Callback
*99*CB code# 335562*99*98765# Calls CallBack number assigned to CB code. The caller is
granted a line. In the example, when the caller enters the CB
code, he will be called back at the number: 030 223361.
No de-
fault
possible
X
Disconnect
## The TELES.iTA/2TR Box emulates a telephone's disconnect
key. The line is disconnected without having to hang up.
X
Disconnect for Personal
CallBack
*#
After you call Personal CallBack, you terminate the connection
using this command. You can then make another call then.
X