Operation Manual

Configuring TELES.iTA/2TR Box Functions
Page 28 © 1998 by TELES AG Berlin, Version 1.30/iTA-eu/f/8.02, Issue: June 1998
On the General sheet, you can set the call
number, the service indicator, and the signal
gain for each port as well as the D channel
protocol .
On the Call Forwarding sheet, you can enter
the call forwarding destination numbers for
each port. You enable call forwarding by
clicking on the active check boxes. When you
check the internal (Port) option the call for-
warding is to the other port and you must enter
the port number as the destination number.
For Personal CallBack Server, you will see
an additional sheet in which you can enter the
access number. You will then be able to enter
individual CB codes and CallBack numbers. as
pictured on the left.