Bedienungsanleitung User manual IMPERIAL BAS 1 Bluetooth Mini Speaker D E
D Inhalt 1. Vorwort 3 2. Sicherheitshinweise 3 3. Lieferumfang 3.1. Abbildungen 4 5 4. Inbetriebnahme 4.1. Bluetooth Modus 4.1.1. Verbinden 4.1.2. Wiedergabe 4.1.3. Telefonmodus 4.2. TF Modus 4.3. AUX Modus 7 8 8 9 10 11 12 5. Fehlersuchhilfe 13 6. Technische Daten 14 7.
1. Vorwort Vielen Dank, dass Sie sich für dieses Produkt entschieden haben. Bitte lesen Sie diese Bedienunganleitung vor dem ersten Gebrauch sorgfältig durch, und bewahren Sie diese für zukünftige Gelegenheiten zum Nachschlagen auf. Diese Anleitung hilft Ihnen beim • bestimmungsgemäßen • sicheren • vorteilhaften Gebrauch des IMPERIAL BAS 1.
wenn besondere Aufmerksamkeit gefordert ist, z.B. im Straßenverkehr. D • Schützen Sie Ihr Gehör vor hoher Lautstärke. Vermeiden Sie, die Lautstärke nach einer Eingewöhnungsphase kontinuierlich zu erhöhen. • Der Lautsprecher erzeugt Magnetfelder, die Herzschrittmacher oder implantierte Defibrilatoren beeinflussen können. Halten Sie einen Abstand von mindestens 3cm zwischen Lautsprecher und diesen Geräten.
• IMPERIAL BAS 1 (je nach Ausführung in weiß oder schwarz) • Ladekabel (USB auf Mikro USB) • 3.5mm Anschlusskabel • Bedienungsanleitung • Garantiekarte 3.1. Abbildungen 1. Ein-/Ausschalter (Position links aus, Position rechts ein) 2. Status LED 3 1 rot = lädt, grün = Akku geladen, blau (blinkend) = Bluetoothmodus Verbindungssuche, blau (konstant) = Bluetoothmodus verbunden, orange = TF Modus & AUX Modus 2 3.
4. Mikro USB Buchse D Buchse zum Laden des integrierten Akkus über das Ladekabel (im Lieferumfang enthalten) 5. Cinch Buchse 4 Für den Betrieb mit externen Geräten über Kabel (AUX Modus) 5 6. (M) Taste Zum Wechsel zwischen Bluetooth-, AUX- und TF Modus 7. (> ƖƖ) Taste Beginnt/Pausiert die Wiedergabe; Anrufannahme 6 7 8 9 8. (-) Taste Im TF- und Bluetoothmodus zum vorigen Titel wechseln, Wiedergabelautstärke leiser 9.
Im TF- und Bluetoothmodus zum nächsten Titel springen, Wiedergabelautstärke lauter. 4. Inbetriebnahme Vor der ersten Inbetriebnahme empfehlen wir, den BAS 1 mit Hilfe des im Lieferumfang enthaltene USB Ladekabels vollständig aufzuladen. Hierzu gehen Sie wie folgt vor: • Verbinden Sie das Ladekabel mit der Mikro USB Buchse des IMPERIAL BAS 1. • Nun schließen Sie das Kabel an die USB Buchse eines entsprechenden Gerätes (Laptop, PC o.ä.) an und schalten Sie dieses ein.
D 4.1. Bluetooth Modus Nachdem Sie den BAS 1 wie unter 4. beschrieben aufgeladen haben, können Sie den Lautsprecher verwenden. Hier stehen Ihnen 3 Möglichkeiten zur Verfügung, die Sie durch Drücken der (M) Taste (siehe Abb. 6) einstellen können. 4.1.1. Verbinden Werkseitig ist der Betrieb über Bluetooth voreingestellt. Hierzu gehen Sie wie folgt vor: • Schalten Sie den BAS 1 durch Betätigen des Schiebeschalters (siehe Abb. 1) auf die Position „on“ ein.
blau. • Nun kann der BAS 1 mit dem Bluetoothgerät verwendet werden. Hinweis: das Pairing muss i.d.R. nur einmal durchgeführt werden. Möchten Sie nach einer Pause die Verbindung erneut herstellen, sollte dies automatisch erfolgen, sobald Sie den BAS 1 einschalten. Möchten Sie ein neues Bluetooth Gerät mit dem BAS 1 verbinden, trennen Sie die bestehende Bluetoothverbindung durch Drücken und Halten der (> ƖƖ) Taste (siehe Abb. 7). Die Status LED blinkt blau und Sie können das neue Gerät verbinden. 4.1.2.
D • Über (+) springen Sie in der Wiedergabeliste einen Titel nach vorne (kurz drücken); bei längerem Drücken der (+) Taste erhöhen Sie die Lautstärke der Wiedergabe. 4.1.3. Telefonmodus Sofern Sie ein Smartphone über Bluetooth mit dem Lautsprecher gekoppelt haben, steht Ihnen auch der Telefonmodus des BAS 1 zur Verfügung.
und halten Sie die (-) Taste. 4.2. TF Modus Dank des integrierten Micro SD Kartenlesers kann der BAS 1 auch Musikdateien von Speicherkarten wiedergeben. Um diesen Modus aufzurufen, gehen Sie wie folgt vor: • Stecken Sie eine Micro SD Karte in den Kartenleser (siehe Abb. 3). Bitte beachten Sie, dass der Chip der Karte bei Einschub nach unten zeigen muss. • Schalten Sie den BAS über den Schiebeschalter (siehe Abb. 1) ein.
D 4.3. AUX Modus Der BAS 1 kann auch kabelgebunden zur Musikwiedergabe genutzt werden. Hierzu steht der AUX Modus zur Verfügung. Gehen Sie hierzu wie folgt vor: • Verbinden Sie ein externes Wiedergabegerät (MP3 Player o.ä.) über das im Lieferumfang des BAS 1 enthaltene 3.5mm Audiokabel mit der Cinch Buchse (siehe Abb. 5) des BAS 1. • Schalten Sie den BAS 1 über den Schiebeschalter (siehe Abb. 1) ein. • Schalten Sie das Wiedergabegerät ein und beginnen Sie mit der Musikwiedergabe.
5. Fehlersuchhilfe D Problem Ursache Lösung BAS 1 lässt sich nicht einschalten Akku leer Akku über USB Ladekabel aufladen Keine Musikwiedergabe hörbar 1. BAS 1 befindet sich im falschen Modus 1. Durch Drücken der (M) Taste den Modus Wechseln 2. Wiedergabegerät ist ausgeschaltet 2. Wiedergabegerät einschalten 3. Kabelverbindung nicht korrekt 3. Kabelverbindung prüfen 4. Lautstärke ist zu gering eingestellt 4.
D Problem Ursache Lösung Bluetoothverbindung kann nicht hergestellt werden 1. BAS 1 im falschen Modus 1. Modus über (M) Taste wechseln 2. Bluetooth nicht eingeschaltet 2. Bluetooth einschalten und verbinden Bluetoothverbindung verlangt Passwortabfrage Gerät mit Bluetoothversion < BT 3.0 wird verwendet Passwort eingeben (standardmäßig „0000“) 6. Technische Daten Aktiver Mono-Lautsprecher Ausgangsleistung: 3W/4Ω Frequenzbereich: 100 Hz - 18 KHz Wandlereinheit: φ 40mm Bluetooth 3.0/2.1 + EDR/2.0/1.
Akkutyp: 3.7V/430mAh Li-Polymer Ladespannung: 5V DC über USB Kabel 3.5mm Cinch Audio Eingang 1999/5/EG-konform 7. Technische Hotline Sollte Ihr BAS 1 einmal nicht richtig funktionieren, muss nicht gleich ein Defekt vorliegen. Gerne helfen wir Ihnen unter 02676/9520101 weiter. Alternativ kontaktieren Sie uns per Mail über service@telestar.de oder per Fax über die 02676/9520159.
Table of contents E 1. Preface 17 2. Your safety is important! 17 3. Scope of delivery 3.1. Images 18 19 4. Getting started 4.1. Bluetooth mode 4.1.1. Establish connection 4.1.2. Music playback 4.1.3. Phone mode 4.2. TF mode 4.3. AUX mode 21 22 22 23 24 24 25 5. Troubleshooting 27 6. Technical data 28 7.
1. Preface Thank you for choosing this high-quality product. This manual is kept brief because we know you want to start using the product in stead of reading this manual. However for the best listening experience you need some basic information on the usage of the product. How to use and what it is for, we will explain in this manual – as brief as possible and extended if necessary. 2.
• The speaker can influence pacemakers and implanted defibrillators due to the integrated magnetic fields. For safety please keep at least 3 cm between the headphones and above mentioned medical devices. • Use the speaker only in surroundings as described in the technical data section. Too high temperatures and humidity can cause damage to the integrated rechargeable battery and even cause fire or explosions. E 3.
3.1. Images 1. On-off switch (Position left off, position right on) 2. Status LED 3 1 2 red = charging, green = charged, blue (flashing) = Bluetooth mode connection search, blue (permanent) = Bluetooth mode connected, orange = TF mode & AUX mode 3.
4. Micro USB port Charging port for internal battery via charging cable (included) E 5. Cinch port 4 5 For connection of external devices via cable (included), operation in AUX mode 6. (M) button To switch between Bluetooth, TF and AUX mode 7. (> ƖƖ) button 6 7 8 9 Start/pause of music playback; pick up phone call 8. (-) button Previous track (Bluetooth & TF mode), decrease playback volume 9.
Next track (Bluetooth & TF mode), increase playback volume E 4. Getting started Before getting started, we recommend to fully charge the IMPERIAL BAS 1 by using the USB charging cable. Please follow the procedure: • Connect the charging cable to the BAS 1‘s micro USB port. • Set up a connection between the BAS 1 and a charging device that provides a USB port with 5V DC output power, such as Laptop or PC and activate this device.
4.1. Bluetooth mode E After charging the BAS 1 according to point 4, the speaker system is ready to use. The IMPERIAL BAS 1 may be used in three different modes that can be selected by pushing the (M) button (see image 6). 4.1.1. Establish connection Bluetooth operation is the speakers‘ preset-mode. Please follow the procedure: • Turn on the BAS 1 by putting the slide switch (see image 1) to „on“ position.
• The BAS 1 may be used with the connected device. Hint: the pairing operation needs to be made only once. If you want to reconnect the device after a pause, it will set up automatically as soon as you switch on the BAS 1. If you want to connect a new device via Bluetooth, cut the established connection by pushing and holding the (> ƖƖ) button (see image 7). The status LED starts flashing blue and you may connect another device. 4.1.2.
4.1.3. Phone mode E If you have paired a smart phone to the BAS 1 via Bluetooth, you may also use the speakers‘ phone mode of the speaker. The phone mode may be operated as follows: • When receiving an incoming call on your phone, the music playback is paused and a ring tone sounds to signal the call over the speaker. • Push the (> ƖƖ) button to answer the call, the BAS 1 works similar to a hands-free car kit. • Via (-) or (+) the call volume may be adjusted during the phone call.
• Insert a micro SD card into the card reader (see image 3). Please note that the card needs to be inserted facedown. • Turn on the BAS 1 by putting the slide switch (see image 1) to „on“ position. • If the inserted micro SD card contains MP3 music files, the playback will start automatically and the orange status LED (see image 2) illuminates permanently. • The operation under TF mode is similar to the operation under Bluetooth mode (see chapter 4.1.2.).
E • Turn on the BAS 1 by putting the slide switch (see image 1) to „on“ position. • Turn on the playback device and commence the music playback. • Push the (M) button (see image. 6) to set the BAS 1 to AUX mode. The status LED will switch to orange. • You can start and pause the music playback via the (> ƖƖ) button. The (-) and (+) buttons may be used to adjust the volume.
5. Troubleshooting Problem Cause Solution BAS 1 may not be switched on Battery empty Reload battery No music playback audible 1. BAS 1 in wrong mode 1. Change mode with (M) button 2. Playback device switched off 2. Switch on playback device 3. Cable connection not correct 4. Volume is set too low 27 3. Check cable connection 4.
E Problem Cause Solution Bluetooth connection failure 1. BAS 1 in wrong mode 1. Change mode with (M) button Bluetooth connection requires password 2. Bluetooth deactivated Bluetooth version on device < BT 3.0 2. Switch on Bluetooth and connect Enter password (standard: „0000“) 6. Technical data Active mono speaker Output power: 3W/4Ω Frequency range: 100 Hz - 18 KHz Driver unit: φ 40mm Bluetooth 3.0/2.1 + EDR/2.0/1.2/1.1 Battery type: 3.
3.5mm Cinch Audio In 1999/5/EG-conform E 7. Technical support If your BAS 1 doesn‘t work properly, this doesn‘t necessarily mean that the item is broken. Our technical support will try to solve your problem. Please feel free to contact us via email over service @telestar.de. If we cannot solve your problem this way, please send the item to following address: TELESTAR Servicecenter, Am Weiher 14, 56766 Ulmen, Germany.
Ihr Gerät trägt das CE-Zeichen und erfüllt alle erforderlichen EU-Normen. Änderungen und Druckfehler vorbehalten, Stand 05/14. Abschrift und Vervielfältigung nur mit Genehmigung des Herausgebers.