Operation Manual

22
4.1. Bluetooth mode
After charging the BAS 1 according to point 4,
the speaker system is ready to use. The IM-
PERIAL BAS 1 may be used in three different
modes that can be selected by pushing the (M)
button (see image 6).
4.1.1. Establish connection
Bluetooth operation is the speakers‘ preset-mo-
de. Please follow the procedure:
• Turn on the BAS 1 by putting the slide
switch (see image 1) to „on“ position. The
BAS 1 is activated, there is a ringing sound
and the status LED (see image 2) is as-
hing blue.
• Activate Bluetooth mode on the device you
wish to connect with the BAS 1. To activate
Bluetooth mode may differ from device to
device, so please check the user manual of
the device you wish to connect.
• As soon as the connection is established,
there is an acoustic signal and the blue
status LED (see image 2) illuminates per-
manently.
E