User's Guide

Teletrac, Inc. - Prism TM Information and Installation Guide
52 1622-0300 B1 3/18/04
Appendix C
APPENDIX C – INSTALLATION EQUIPMENT
Metro Equipment
Each metro should have the following available on site for the installers.
• Eltron Printer – for printing labels to affix to units (TLP 2242 Series or equivalent)
Installer Equipment
Each installer should have the following equipment in their vanstock.
• Laptop with working serial port
• Working VLUplus in their Vehicle (can be mobile unit)
• Working RF VLU in their Vehicle (can me mobile unit)
• Working PRISM TM in their vehicle (can be mobile unit)
• VLUplus Programming tools
• RF VLU Programming tools*
• PRISM TM Programming tools
• VLU Terminal software (VLU_PRO)
• HyperTerminal SW (part of std. Windows Install)
• VLUplus
Programming Cable (or Technocom Tester)
• CDPD Diagnostics MDT
• Good-Working CDPD/GPRS Mag-mount Antenna (for reference)
• Good-Working GPS Mag-mount Antenna (for reference)
• Good-Working RF VLU Mag-mount Antenna (for reference)*
• MDT Serial Cable
• MDT Programming Cable
• MDT Programming Software
• Std. Tool Kit with the usual electrical tools (soldering iron, wire cutters, volt meter, etc.)
• GPS Receiver – Part # 400-3070 (Garmin GPS48)
NOTE: * RF VLUs and its support hardware and software are only needed in markets with both
RF and CDPD coverage.