User's Manual

Extended Range Amplified WLAN System Guide
Version 07/18/02
The wireless LAN installer should refer directly to the Cisco Aironet product equipment User Guide and
Installation Manual for proper configuration procedures in setting the required Cisco radio unit output
power level.
Warning: Operating the Cisco Aironet equipment with Power Amplifier power levels, cable length
and/or antenna gains in variance to the WLAN system specifications shown in Tables 1-1 and 1-2 is
prohibited and may exceed authorized FCC RF power level specifications.
3.4 Other Wireless LAN System Configurations
Any questions related to additional wireless LAN system component parameter configurations such as
Cisco Aironet radio unit network SSID and IP assignment; WEP encryption codes, protocol filtering, etc.
should be referred to the specific equipment User Guide for proper configuration procedures and settings.
4 Installation
4.1 Installation Notes
4.1.1 Primary Required Tools
• User guides and installation manuals for all equipment
• Assorted open-end and/or adjustable wrenches
• Antenna cable clamps and/or cable hanging kits
• Wire cutter/stripper
• Cable connector crimping tool
• Screwdriver set – cross tip and flathead
• Pliers
4.1.2 Other Required Equipment
• Suitable Antenna Mast Assembly; or
• Tower hardware
• Antenna Grounding Kit
4.1.3 Helpful Tools and Equipment
• Cellular telephones or walkie-talkies
• Binoculars
• Compass
• Leveling tool
• Handheld GPS
• Ladder