User's Manual

Extended Range Amplified WLAN System Guide
Version 07/18/02
1 Introduction
1.1 About this Guide
This guide provides a system technical description and generalized overview of the Teletronics Extended
Range Amplified WLAN System engineered for exclusive use with the Cisco Aironet 350 Series Wireless
product. It also sets forth the mandatory technical parameters, installation specifics, warnings, and
configuration steps necessary for professional wireless system installation. Adherence to the installation
parameters set forth in this guide is essential for compliance with current FCC rules, regulations, and FCC
grants received by Teletronics International for FCC ID: MFM SAMP24Wand FCC ID: MFM
SAMP24S. It is not the intention of this guide to describe all the necessary installation facets for a
complete wireless LAN and antenna system installation. Installation details such as the mounting of the
wireless LAN radio hardware, network cabling, antenna cabling, antenna mast/tower installation, and/or
antenna grounding systems should be referred to a professional WLAN system installer. This guide is
specific only to the use of the Teletronics Extended Range Amplified WLAN System, and the equipment
configuration parameters necessary for properly installing the system within the overall wireless LAN
system. This installation guide is included with each Teletronics Extended Range Amplified WLAN
System and it is intended to supplement the Cisco Aironet product and other equipment manufacturer
User and Installation Guides included within the WLAN system for the individual system components.
This Installation Guide is intended for use by the professional wireless LAN system installer.
1.2 Who Should Use this Guide
Installation of the Teletronics Extended Range Amplified WLAN System should be accomplished only
by a qualified wireless LAN system installer who is:
• Knowledgeable of the use, installation and configuration procedures for the Cisco Aironet 350 Series
Wireless product line and associated networking components.
• Knowledgeable of each system component’s equipment User and Installation Guide.
• Knowledgeable of the installation and configuration procedures for the site’s network infrastructure
system and wiring.
• Knowledgeable of the installation procedures, safety, and code requirements for the site’s antenna,
antenna mast, antenna cabling, and installation. Teletronics highly recommends that the antenna
installation be performed by a qualified antenna installation professional.
1.3 Notes and Warnings to the User and Installer
1.3.1 Interference and Equipment Limits
This equipment is to be operated in compliance with the limits of Part 15 of the Federal Communications
Commission (FCC) Rules. As such, operation of this equipment may not cause harmful interference, and
this equipment must accept any interference received, including interference that may cause undesired
performance.