User manual

High De nition TV Satellite Receiver

11.6. Channels searching

This section describes the steps required for con guring

the installation, the channel searching or maintaining lists

of channels.

Antenna con guration

This menu lets you con gure the receiver according to your

installation (simple, DiSEqC, Motor, Unicable).

and keys let you to scroll through the choices.

Select your installation with the keys or . Possible

options are:

None

Your installation is a simple installation, i.e. the receiver is

connected directly to the antenna.

 In “Satellite” option, select the satellite to which the

antenna is oriented.

The level bars will tell you if you have the satellite

signal and what is the strength and quality for each TV

channel.

 By pressing the yellow key is shown the LNB Setup

submenu, where you can modify the o set of the LNB

(+1 V).

 By pressing the blue key displays the submenu where

you can select Advanced Settings values “ Auto”,1, 2, 3, 4

and 5 for the “Repeat DiSEqC” option.

2 way splitter

Your installation has a 2 input DiSEqC switch, each

connected to an antenna oriented to di erent satellites.

 Select one of the two ports of the switch in the

“DiSEqC port” option and assign a satellite to

that port on the “Satellite” option. Then select

the other port and assign another satellite.

The level bars will tell you if you have the satellite signal

and what is the strength and quality for each TV channel.