User manual

27
EN
Search manual channels
This menu lets you making a search in a given transponder
belonging to a transponder list or add new transponders
to the list.
 Satellite: Indicate the satellite to which the antenna is
aimed.
 Frequency: With the
key, delete digits shown and
enter the new frequency for the transponder.
 Polarisation: Indicate whether the search is performed
on the polarity Horizontal, Vertical or both (None).
 Symbol rate: Use the
key to delete digits shown and
enter the new symbol rate.
 FEC: Select a value for this option between: 1 / 2, 2 / 3, 3
/ 4, 5 / 6, 7 / 8 and Auto.
 Modulation system: Indicate whether the modulation
of the transponder to look for is DVB-S or DVB-S2.
 Network searching: This type of search, the receiver
reads the NIT and list all channels that appear in it.
Update channels list
If you have an updated list of channels and wish to update
the ZAS HD SAT, proceed as follows:
 Copy the list in a memory stick (pen drive) FAT 32 in the
root director
y. You can select option “Export channel list
(USB)”.
 Connect the memory stick to the receiver (front USB
connector).
 Select the option “Update channel list” and press OK.

Choose the  le that you want to update on the channel
list and press OK.
 Move the cursor to “YES” and press OK.
 The update may take a few moments. Please wait.
If there are no  les avaliable, the message “No channel  les
found” will appear.