User Manual

56 Operation BTR-30N, TR-30N, TR-32N
Stage Announce (SA)
To route audio from the beltpack directly to the stage
announce connector on the back of the base station, do the
following:
> Press the SA button. 
The base station’s SA relay is also closed. The beltpack
sidetone is lost as an indication that stage announce is
activated. The other beltpacks and wired users do not
hear this beltpack’s audio when SA is pressed. The
button is non-latching and activates the nearby red
LED when pressed.
To enable or disable Stage Announce, do the following:
1. Press and hold SET while pressing the SA button. 
The current mode of the SA button displays.
2. Still holding SET, press the SA button again to turn SA on
or off.
3. Release SET to accept the displayed setting.
Wireless Talk Around (WTA)
To disconnect the beltpack audio from the wired intercom,
auxiliary input/output, and the base station’s local headset,
do the following:
> Press the WTA button.
Other beltpack users on that audio channel can hear
the user as normal. The WTA button activates the
nearby red LED as well as the appropriate talk LED
when pressed.
To enable or disable Wireless Talk-Around options, do the
following:
1. Press and hold SET while pressing the WTA button. 
The current WTA mode displays. Pressing WTA a second
time changes modes. Available options are: Off, On, and
Lon (Latch on).
2. Release SET to accept the displayed setting.