User Manual

BTR-30N, TR-30N, TR-32N Operation 57
Groups and Channels
The first LCD screen the beltpack displays is the Group/
Channel screen. This screen shows the currently selected
receive group followed by the beltpack transmit channels.
To ed
it groups and channels, do the following:
1. Push SET to edit the transmit channel. 
The channel number flashes.
2. Using the UP/DOWN arrow buttons, select the desired
transmit channel.
3. Push SET to accept the channel. 
The receive group flashes.
4. Using the UP/DOWN arrow buttons, select the desired
receive group.
5. Push SET to accept the receive group.
The new group containing the selected channel is now set.
NOTE:
• To escape out of the editing without any changes,
Press MENU.
• Factory group frequencies cannot be changed.
User group frequencies (Group 19u to 30u) can be
changed.
Transmit Frequency
The Transmit Frequency screen displays the beltpack
transmitter frequency in MHz. The frequency is not changeable
in factory-determined groups, but it is changeable in user-
defined groups.
To edit the TX fr
equency (User Groups Only), do the
following:
1. Set the unit to the desired user-defined group and channels.
See Groups and Channels Instructions. The menu structure
in Figure 73 indicates how to get to the transmit frequency
screen.
2. Push SET to edit the TX frequency. 
The frequency flashes.
3. Using the UP/DOWN arrow buttons, select the desired
frequency. 
The frequency can be changed in 25 kHz steps.
4. Push SET to place the unit on the new transmit frequency.
FIGURE 73.
Group/Channel & Transmit
Frequency Screen