User Guide

Q2 OPERATION AND MAINTENANCE MANUAL 9601 42
BAL
Adjusts the Stereo Group signal within the main Stereo Left and
Right buses. The range of adjustment is +/-3dB.
SUB/LCR
Routes the Stereo Group signal to the main Stereo (Left/Right) bus,
and/or the main Mono (centre) buses, with led indication.
ON
The ON switch enables the group output, and is indicated by an
led in the switch when the output is active. Internal links allow the
ON switch to be configured as a group CUT.
MATRIX SEND PRE
Allows the Stereo Group input to the Stereo Matrix to be fed
pre-fader, rather than post-fader.
CUE/SOLO
Solo’s the Group signal to the main monitors (headphones or
loudspeakers), with flashing led indication. See the Input Module
for a functional description of the solo button.
MUTE SAFE (Not active on VCA consoles)
Prevents the Mute Group (or scene preset) master from muting the
channel, and may be used to locally override muted channels.
VCA/MUTE GROUP 1 ASSIGN
Assigns the channel mute to VCA/Mute Group 1, with led
indication. Similarly for assigns 2, 3, 4, 5, 6, 7 and 8. If the VCA
option is fitted then the channel level will depend upon the position
of the channel fader and the VCA group master.
Internal links allow the MUTE GROUPS to become SCENE
PRESETS, that is when a MASTER is pressed, all assigned
channels are switched ON, not muted.