User Guide

Q2 OPERATION AND MAINTENANCE MANUAL 9601 53
CUE/SOLO MASTER SECTION
PFL/AFL
Selects the Cue/Solo mode to be PFL, or AFL when the switch is
depressed.
TRIM
Adjusts the level of the Cue/Solo signal, most useful in the PFL
mode.
CUE INTLK
Interlock mode selection. In normal mode, Cues are additive. That
is any number of Cue buttons may be pressed and the signals will
be added. In INTERLOCK mode, only one Cue may be active at
any time, so pressing a Cue will automatically cancel the
previously selected Cue.
CUE I/P
Indicates that an input CUE is pressed. Inputs take priority over
outputs in normal mode, so pressing an input CUE will suspend an
output CUE until the input is released.
CUE O/P
Indicates that an output CUE is pressed. This led will extinguish if
an input CUE is pressed while an output CUE is already active.
CUE RESET
Clears all pressed CUE buttons.