User Guide

Q2 OPERATION AND MAINTENANCE MANUAL 9601 78
The stereo module is very similar to the mono group output but of
course the signal paths must be duplicated. There are two group
output signal paths and two matrix sends which can selected pre or
post fader. The matrix returns are fed to ganged pots and the matrix
output is again duplicated to give a stereo output.
Sub grouping to the L/R and Mono buses is done independently
and there is a balance facility for the stereo sub signal. Soloing of
the group and matrix signals is possible using identical circuitry to
that described previously.
STEREO GROUP OUTPUT LINKS
Link Function
1, 2 Group Bus Programming **
3, 4 Matrix Send Programming **
(7), 8 Post/Pre Mute Matrix Send
(207), 208 Post/Pre Mute Matrix Send R
11 Link for non VCA version
12, 13, (14) Cut/On Lamp
(15), 16 Mute/Scene
** Installed link depends upon module position
( ) Factory Position
THE STEREO GROUP OUTPUT MODULE