User Guide

Q2 OPERATION AND MAINTENANCE MANUAL 9601 81
The odd numbered group routing switches are mounted on the sub
board along with the direct switch. Switches for enabling
Foldbacks 1,2,3,4 and Auxiliaries 1,2 are also mounted on the sub
board.
LK3 is normally installed but if removed and LK4 installed then
auxiliary 3 is routed through the direct switch. This gives the
option of having no direct switch but an auxiliary 3,4 enable
switch is created.
INPUT SUB BOARD LINKS
LK Function * if factory installed
1 VCA fader
2 Audio fader *
3 Aux 3 normal *
4 Aux 3 depends on DIR switch
5 CV Input *
6 VCA Mute *
7 Ground Link *
27 Stereo module
28 Mono module
Note that if an external fader is used then LK7 should be removed
and the fader wired as shown in the drawing AS1358-1.