User's Manual

Clamps
Clamps are pro vided for mount ing the ALP-600
onto the an tenna mast. At tach the clamps with the
hard ware sup plied. See Fig ure 5.
Coax Ca ble
For best re sults, it is rec om mended that ca ble losses
be kept un der 4 dB. (Ev ery 3 dB of sig nal loss re -
sults in a sys tem op er at ing dis tance re duc tion of
25%).
Do not clamp the an tenna to hor i zon tal metal ob -
jects that ex tend past the clamp. This will de tune
the an tenna and cause loss of range and per for -
mance.
A 10 ft coax ca ble (PN 690419) is in cluded with
the ALP-600.
AC CES SORIES
PRINTED IN U.S.A.
Copy right© 1997 by Telex
TELEX COM MU NI CA TIONS, INC.
All rights re served.
July 1997
-4-
Fig ure 5
Clamps
T
elex
An tenna Mast
Four sec tions, clear an od ized alu mi num
mast with ex tended length of 90 1/4".
Or der No. 878897-1
Spe cial Low Loss An tenna Ca bles
with TNC Con nects
Length Part No.
10 Ft. (3 me ters) 690419
25 Ft. (7.6 me ters) 71151-029
50 Ft. (15 me ters) 71151-050
75 Ft. (23 me ters) 71151-075
100 Ft. (30 me ters) 71151-100