IP Dome Camera www.telexper.
1 IP Camera Introduction Product Overview 9. Gnd Gnd 8. Alarm In Alarm In 7. Audio Out Alarm Out 6. Audio Gnd Audio Gnd (for audio in & out) 5. Audio In Audio In 4. GND GND 3. DC12V In DC12V In 2. D-(RS485) RS485 (D-) 1.
2 Notice: * You can provide power to nCam Series cameras via Telexper PoE Gigabit Hub or you can connect DC12V In (pin-3) and GND (pin-4) for power supply (refer to above pictures). * Please use the CAT-6/CAT-5e RJ-45 cable to connect each Telexper camera. * The effective distance between the PoE Hub and IP camera is up to 100 meter.
3 Focal adjustment for manual vari-focal cameras: * Dome Camera: (1) Unscrew screws on the lens cover and remove the lens cover. (2) Loosen the two knobs on the lens to adjust the focus. Tighten the knobs after adjustment. (3) Place the lens cover back starting with the front screw hole. Tighten the screws back to the lens cover.
