nVR-15W/15RW www.telexper.
1 Network Video Recorder VRVR-15W 15W/15RW /15RW Installation Connect the nVR to the CMS network; the CMS system will auto detect the nVR devices without any additional configuration。 Record Function Please use CMS to manage the recording task Product Overview nVRnVR-15W 15W / 15RW 15RW
2 Network Video Recorder RAID 5 Setup 1. Insert HDD to NVR and restart the system. A pop-up window (see picture below) will appear. Click 2. On your system desktop, double-click HighPoint Web RAID Management shortcut 3. to stop the program. . Internet Explorer will be initiated automatically. Please select “Continue to this website (not recommended)”to continue to the main page of HighPoint Web RAID Management.
3 4. Enter User Name: RAID, Password: hpt, and then click 5. After log in successfully, you will see Logical Device Information page. . Ensure the quantity of HDD is correct. If not, please turn off the system to check whether HDDs were inserted properly or were defective. Under Physical Device Information section, you can distinguish the new/used status of the HDDs from the HDD icon. HDD icon with letter L (Legacy) on it is for used HDD. HDD icon without any letter is for new HDD.
4 6. After checking the HDD Status, go to Manage, then select Device. 7. Under Manage page, click 8. Click to enter Initialize Physical Device page. to select all un-initialized HDD, and then click to start.
5 9. Click OK on “All data on the disk you selected will be deleted. Do you want to continue?” 10. System will message you for every completion of each HDD.
6 11. After completion of HDD initializing, there will be no letter on the HDD icons on the Physical Device Information. 12. Go to Manage and select Array.
7 13. Click to enter Create Array Page. 14. Under Create Array page, select RAID 5 for Array Type, Foreground for Initialization Method. Click to select all HDDs, and then click to begin.
8 15. A message will appear upon completion. 16. Initialization process will begin upon array creation. 17. Upon initialization process, the status will become Normal.
9 18. Please restart the system. 19. When you restart the system, the System Process window will appear. This time, please do not click and wait 30 seconds for this window to disappear. 20. The system will ask for HDD formatting. Please click to begin HDD formation process. 21. Upon HDD formation, the system will automatically restart again and start NVR program.
