User's Manual
Table Of Contents
- Welcome...
- Getting started
- Using your mobile
- Making calls
- Receiving calls
- Ending calls
- During a call
- Call log
- Voice recording
- Keypad lock (12 keypad only)
- Your phonebook
- To use your phonebook
- Messaging
- Reading messages
- Message options
- Creating a message
- Managing your Inbox and Sent Items
- Sending preset messages
- Voicemail (12 keypad only)
- Call logs and virtual timer
- Alarm clock
- Special stuff
- Parent’s section h
- Other information
- Menu items
35
h
Changing the admin password
Note: You must first be in Administrator mode to
change the admin password.
1 From the standby screen, press
c
, locate the
Settings option and press
c
to select.
2 Select Security and then select the Change Admin
P/W option.
3 Enter the old admin password using either the 4 key
or 12 key method, as appropriate, and press
a
(OK).
4 Enter your new admin password and press
a
(OK).
Then repeat the new code and press
a
(OK). If the
two new codes match, then the password will be
changed.
Enabling the SIM password
1 From the standby screen, press
c
, locate the
Settings option and press
c
to select.
2 Select Security and then select the SIM Password
option.
3 Select the On option and then enter the current SIM
code. This is a code (between 4 and 8 digits) that is
not linked to the Admin password, it is a function of
the SIM card. Press
a
(OK) once the correct code
has been entered.
Note: When the SIM password is on, you will need
to enter the SIM password code every time you
switch on your mobile.
Changing the SIM password
Please see the next page.