User's Manual

G
\`
,
Back to previous menu
Back to idle mode
5.1.1 Camera Options
From the camera preview mode, you can access to the Camera Options by pressing the [Option]
soft key (left) for the following options and settings for the Camera.
z Album : By selecting this menu, you can view the saved photos in the Image Viewer.
z Camera Settings
 Flash (On/Off): You can set the camera flash light on or off with this setting. When the
Flash is on, the camera flash will lit on when you take a picture.
 Shutter Sound (Sound1/2/3/Off) : Allows you to select a shutter sound among three kinds
of shutter sounds or turn off the shutter sound. The sound makes you feel the sense of
taking a picture.
 EV (-4/-3/-2/-1/0/+1/+2/+3/+4): You can set the EV (Exposure Value) and the preview will
look darker in lower EV and brighter in higher EV.
 Banding (60Hz/50Hz): You can select the sampling bandwidth of the camera sensor.
When bandwidth increases, the memory size and the picture quality will increase.
 Cont. Shot : It allows you to take multiple continuous shots by pressing the camera key.
You can set this function off or take 1, 3, or 5 continuous shots.
 Delay Timer : It allows you to take a picture with delayed timer. If you set the delay timer
at 5 sec, and press the camera key (center navigation key), it will take a picture 5
seconds later. Off/5 sec/10 sec/15 sec
z Image Setting: You can set image size and quality of your photo as following.
 Image Size: 1280X1024, 640X480, 320,X240, 176X20 and 160X120 are available.
 Image Quality (Low/Normal/High): allows you to choose the JPEG quality. The captured
image memory size will increase if you choose higher quality.
z White Balance (Auto/Daylight/Tungsten/Fluorescent/Cloud/Incandescence)
z Scene Mode : Allows you to select scene mode auto or night
z Effect Setting : Allows you to set Image effect among 7 options
 Normal
 Grayscale
 Sepia