User's Manual

G
_Y
z Account Name: Edit the account name.
z Number: Enter the server phone number.
z User Name: Enter the user name required to connect to GSM Data network.
z Password: Enter the password required to connect to GSM Data network.
z Line Type: Choose a network connection type between Analogue and ISDN.
z Speed: Select the desired speed from 9.6 Kbps, 14.4 Kbps and 4.8Kbps.
z DNS : Enter the DNS IP address
9.2.2 GPRS
This setting allows you to change the settings for the GSM Data network as following.
z Account Name: Edit the account name.
z APN: Enter the access point name used for the address of the GPRS network gateway.
z User Name: Enter the User Name required to connect to GPRS network.
z Password: Enter the password required to connect to GPRS network
z Auth. Type: Select the authorization type from Normal and Secure.
10. Communication
10.1 Bluetooth
Bluetooth is a global standard for wireless connectivity. Bluetooth is based on a lowcost, short-range
radio. Bluetooth technology facilitates the replacement of the cables normally used to connect one
device to another, with one universal short-range radio link. Two Bluetooth devices can talk to each
other when they come within a range of 10 meters to each other. Due to their dependence on a radio
link, as opposed to alternate technology such as an infrared connection, Bluetooth devices do not
require a line-of-sight connection in order to communicate.
10.1.1 Power
This menu is switching menu. You can set the switching On or Off the Bluetooth.
When highlighted, it shall display a hint indicate the current Bluetooth power status.
10.1.2 Inquiry Audio Device
This menu is for search discoverable headset or hand-free devices.
If any Bluetooth connection exists, shall ask user to disconnect the connection first. When
highlighted, pressing “OK” shall go to Search Headset screen while pressing “Back” shall go back
to previous screen.