User Manual
- 61 -
13.10 Use emergency key
When the emergency key feature is turned on, the phone attempts to make an
emergency call when you press
and . The phone dials the emergency
number preprogrammed into your phone.
Note: If you have activated the emergency feature, you can also dial an
emergency call by pressing and holding 9 until the phone indicates it is
attempting to make an emergency call.
13.10.1 Activate the emergency key
Before you can use the emergency key feature, you must first activate it.
① Press
MENU
4
>
1
>
1
(
Settings
>
Call Settings
>
Emergency
Key 9
).
② Press
ON
.
Repeat the steps above except, in step
②
, press
OFF
.
Warning: Official emergency numbers vary by location. Only one
emergency number is programmed into your phone, and this is the
number that is dialed when you press
. However, this might not be
the proper number in all circumstances.
13.10.2 Make an emergency call
① Press and .
- 62 -
14. SECURITY
Your phone is equipped with a versatile security system that prevents the
unauthorized use of the phone.
You cannot activate or use certain phone features without having first successfully
entered your phone’s security code.
When entering the security code, a * appears on the screen each time you press a
number key. This prevents others from seeing your code.
If you incorrectly enter a security code five times in a row, your phone won’t accept
any entries for the next 30 seconds. However, if you realize that you’ve entered the
code incorrectly before pressing
OK
, you can use
CLEAR
to erase the code, digit by
digit, beginning with the last digit.
When this guide describes an action that requires the entry of your security code,
each step necessary to this action is provided.
14.1 Change your security code
① Press
MENU
4
>
5
>
2
>
4
(
Settings
>
Security Settings
>
Access
Codes
>
Change Sec Code
).
The Security code field appears.
②
Enter the default security code and press
ENTER
.
③
At the message
New Secu Code
, enter your new security code and press
ENTER
.
④
At the message
Verify Secu Code
, enter your new security code again
and press
ENTER
.
The message
Security Code has been changed
appears.
If you have changed your security code and don’t remember the new code,
contact your service provider. Once you have changed your security code, the
default setting is no longer valid
• The default lock code is 12345.