User's Manual

- 14 -
2. PREPARING YOUR PHONE FOR USE
2.1 Install the battery
Lift the battery door off the phone.
Slide battery following with a picture on the battery.
Then slide battery door upwards until clicks.
Caution: To prevent injury or burns. Do not allow metal objects to contact the
battery terminals. Do not disassemble. Use only the original batteries. Must
be disposed of properly.
2.2 Remove the battery
Note: Switch the phone off before removing the battery!
Press and hold the button at the top of the battery door. Lift the battery door off
the phone.
Lift the battery off.
2.3 Charge the battery
① Connect the lead from the charger to the bottom of the phone.
② Connect the charger to an AC wall outlet. The battery indicator bar starts to
scroll.
Note: If the battery is totally empty, it may take a few minutes before the
charging indication appears on the screen.
Tip: The phone can be used while charging if the phone is switched on.
Note: Disconnect your phone from the charger if the phone becomes hot during
a call.
③ The battery is fully charged when the battery indicator bar stops scrolling, and