User's Manual

5.8 Paging

Press the page button to find out handy. Then, handy beeps.

After you find it out, press any key on the handy to stop the beep sound. From the base,

you can also stop the beep if pressing page key one more time.

5.9 Handy and Base ID Settings

Once battery in the handy or in the base is replaced, you must configure ID settings as

follows.

① Place handy on the base when a charger is connected to the base.

② When handy beeps and LED is on, ID setting is completed.

Caution : If ID setting is not properly completed, handy displays “Out of Range”. Retry 5.9

Procedure to properly configure ID settings.

5.10 SMS and Voice Mail

① A new SMS or Voice mail arrives when handy is on the base :

z The back light of the handy is On and the handy displays “New Message(s)”

on the screen.

z The backlight is off if you lift up the handy from the base.

② A new SMS or Voice mail arrives when handy is off the base :

z The handy beeps and backlight is on