User's Guide

Table Of Contents

Wearable EVK User Guide

AN-21011301-E1

Ver.1.0.0

4. Download Firmware

4.1 Download Via Telink Burning Board

Follow the steps below to download the program to the TLSR9518A chip:

1. Connect to EVK via Telink Burning Board(refer to 2.1.1);

2. From Telink website Download the BDT tool;

3. Download the BIN file according to the introduction of Step2 on the page;

Note

http://wiki.telink-semi.cn/wiki/IDE-and-Tools/Burning-and-Debugging-Tools-for-all-Series/;

4.2 Download Via TLSR9 DEV KEY

Follow the steps below to download the program to the TLSR9518A chip:

1. Connect to EVK via TLSR9 DEV KEY(refer to 2.1.2);

2. From Telink website Download Download Telink_v323_rds_official_windows, and install;

3. Download the BIN file according to the introduction on the page;

Note

http://wiki.telink-semi.cn/wiki/IDE-and-Tools/Burning-and-Debugging-Tools-for-TLSR9-Series/;