User's Manual

CE910-DUAL Hardware User Guide

1vv0301010 Rev .0 – 2012-07-10

1.4. Document Organization

This document contains the following chapters:

Chapter 1: “Introduction” provides a scope for this document, target audience, contact and

support information, and text conventions.

Chapter 2: “General Product Description” gives an overview of the features of the product.

Chapter 3: “CE910-DUAL Module Connections” deals with the pin out configuration and

layout.

Chapter 4: “Hardware Commands” How to operate the module via hardware.

Chapter 5: “Power supply” Power supply requirements and general design rules.

Chapter 6: “Antenna” The antenna connection and board layout design are the most important

parts in the full product design.

Chapter 7: “USB Port” The USB port on the Telit CE910-DUAL is the core of the interface

between the module and OEM hardware.

Chapter 8: “Serial ports” Refers to the serial ports of the Telit CE910-DUAL.

Chapter 9: “Audio Section overview” Refers to the audio blocks of the Base Band Chip of the

CE910-DUAL Telit Module.

Chapter 10: “General Purpose I/O” How the general purpose I/O pads can be configured.

Chapter 11: “ADC section” Deals with this one kind of converter.

Chapter 12: “Mounting the CE910-DUAL on the application board” Mechanical dimensions

and recommendations on how to mount the module on the user’s board.

Chapter 13: “Packing System” Deals with packing system.

Chapter 14: “Application Design Guide” Deals with the design of host system for download

or upgrade.

Chapter 15: “Conformity Assessment Issues” provides some fundamental hints about the

conformity assessment that the final application might need.

Chapter 16: “Safety Recommendation” provides some safety recommendations that must be

followed by the customer in the design of the application that makes use of the Telit CE910-

DUAL.

Chapter 17: “Document History” provides document revision history of the Telit CE910-

DUAL.