User's Manual

CL865-DUAL Hardware User Guide
1vv0301104 Rev.1 – 2014-03-07
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 56 of 70
Mod. 0805 2011-07 Rev.2
13.3. Recommended foot print for the application
In order to easily rework the CL865 is suggested to consider on the application a 1.5 mm
placement inhibited area around the module.
It is also suggested, as common rule for an SMT component, to avoid having a mechanical
part of the application in direct contact with the module.