User's Manual

CL865-DUAL Hardware User Guide
1vv0301104 Rev.1 – 2014-03-07
Reproduction forbidden without written authorization from Telit Communications S.p.A. - All Rights
Reserved. Page 61 of 70
Mod. 0805 2011-07 Rev.2
13.9. Debug of the CL865 in production
To test and debug the mounting of the CL865, we strongly recommend foreseeing test pads on
the host PCB, in order to check the connection between the CL865 itself and the application
and to test the performance of the module connecting it with an external computer. Depending
by the customer application, these pads include, but are not limited to the following signals:
TXD
RXD
RESET*
GND
VBATT
VBATT_PA
TXD_AUX
RXD_AUX
PWRMON