User's Manual
Table Of Contents
- 1 Overview
- 2 GE864-QUAD V2 Mechanical Dimensions
- 3 GE864-QUAD V2 module connections
- 4 Hardware Commands
- 5 Power Supply
- 6 Antenna
- 7 Logic level specifications
- 8 Serial Ports
- 9 Audio Section Overview
- 10 General Purpose I/O
- 10.1 GPIO Logic levels
- 10.2 Using a GPIO Pad as INPUT
- 10.3 Using a GPIO Pad as OUTPUT
- 10.4 Using the RF Transmission Control GPIO4
- 10.5 Using the RFTXMON Output GPIO5
- 10.6 Using the Alarm Output GPIO6
- 10.7 Using the Buzzer Output GPIO7
- 10.8 Indication of network service availability
- 10.9 RTC Bypass out
- 10.10 External SIM Holder Implementation
- 11 DAC and ADC section
- 12 Conformity Assessment Issues
- 14 Document Change Log
GE864-QUAD V2 Hardware User Guide
1vv0300841 Rev.0.1 24/11/09
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 10 of 65
Ball Signal I/O Function Internal PULL UP Type
L11 GND - Ground Power
RESERVED
A3 - - Reserved
A4 - - Reserved
A5 - - Reserved
A6 - - Reserved
A7 - - Reserved
A8 - - Reserved
A9 - - Reserved
A10 - - Reserved
B1 - - Reserved
B2 - - Reserved
B4 - - Reserved
B8 - - Reserved
B9 - - Reserved
B10 - - Reserved
B11 - - Reserved
C1 - - Reserved
C2 - - Reserved
C3 - - Reserved
C4 - - Reserved
C5 - - Reserved
C6 - - Reserved
C8 - - Reserved
C9 - - Reserved
D1 - - Reserved
D2 - - Reserved
D3 - - Reserved
D5 - - Reserved
E1 - - Reserved
E3 - - Reserved
E4 - - Reserved
E5 - - Reserved
E8 - - Reserved
E10 - - Reserved
F2 - - Reserved
F4 - - Reserved
F5 - - Reserved
F8 - - Reserved
G1 - - Reserved
G2 - - Reserved
G3 - - Reserved
G4 - - Reserved
G5 - - Reserved