User's Manual

GE865 Hardware User Guide
1vv0300799 Rev.6 - 04/06/09
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved page 16 of 58
NOTE: The unconditional hardware Restart should be always implemented on the boards and software should use it
as an emergency exit procedure.
For example:
1- Let's assume you need to drive the RESET# pad with a totem pole output of a +3/5 V
microcontroller (uP_OUT2):
NOTE: The RESET# signal is internally pulled up so the pin can be left floating if not used
10k