User's Guide

LE910Cx HW User Guide
Doc#: 1VV0301298
Rev. 2.0 Page 39 of 120 2018-11-19
Pad Parameter Min Max Unit Comment
R
PD
Pull-down resistance 30 390 [kΩ]
C
i
Input capacitance -- 5 [pF]
NOTE:
Pull-Up and Pull-Down resistance of GPIO3, GPIO7 and GPIO8 is different
than above mentioned
GPIO3 pull resistance is specified as 10KΩ to 50KΩ
4.3.3. 1.8V SD Card Pads
Table 12: Operating Range – SD Card Pads Working at 1.8V
Pad Parameter Min Max Unit Comment
V
IH
Input high level 1.27V 2V [V]
V
IL
Input low level -0.3V 0.58V [V]
V
OH
Output high level 1.4V -- [V]
V
OL
Output low level 0 0.45V [V]
I
IL
Low-level input leakage
current
-2 - [uA] No pull-up
I
IH
High-level input leakage
current
- 2 [uA] No pull-down
R
PU
Pull-up resistance 10 100 [kΩ]
R
PD
Pull-down resistance 10 100 [kΩ]
C
i
Input capacitance 5 [pF]