User's Guide

LE910Cx HW User Guide
Doc#: 1VV0301298
Rev. 2.0 Page 9 of 120 2018-11-19
1. Introduction
Scope
This document introduces the Telit LE910Cx module and presents possible and
recommended hardware solutions for developing a product based on the LE910Cx
module. All the features and solutions detailed in this document are applicable to all
LE910Cx variants, where “LE910Cx” refers to the variants listed in the applicability table.
If a specific feature is applicable to a specific product only, it will be clearly marked.
NOTE:
LE910Cx refers to all modules listed in the Applicability Table.
This document takes into account all the basic functions of a wireless module; suggests a
valid hardware solution for each function and points out incorrect solutions and common
errors to be avoided.
Obviously, this document cannot embrace every hardware solution or every product that
can be designed. Obviously, avoiding invalid solutions must be considered mandatory.
Where the suggested hardware configurations need not be considered mandatory, the
information given should be used as a guide and a starting point for properly developing
your product with the Telit LE910Cx module.
NOTE:
The integration of the GSM/GPRS/EGPRS/WCDMA/HSPA+/LTE LE910Cx
cellular module within a user application must be done according to the
design rules described in this manual.
Audience
This document is intended for Telit customers, especially system integrators, about to
implement their applications using the Telit LE910Cx module.
Contact Information, Support
For general contact, technical support services, technical questions and report
documentation errors, contact Telit Technical Support at:
 [e-mail]
 [e-mail]
 [e-mail]