User's Manual

PRESENTING THE PHONE

Keys Description

 to switch the phone on and off; to enable/disable the “Mute” function

during conversation

 Soft Keys: to perform the menu functions described by the

symbols above the keys on the display (e.g., for 



)

 to send a call, confirm a selection; quickly see the call log; disable

autoblock (see page 21)

 to access the menus, move on to the next item, access other options;

pressed for 1 second to enable/disable the fast ringer silencing function

 to end or refuse a call, reject a selection, quit a menu without changing

the setting, pressed for 1 second to turn autoblock back on; if held

down, to quit the menu completely, irrespective of the current level

 to delete a character (or all of them if held down), figure, call, EMS,

content of a phonebook position or calls lost shown on the display; to

quit a menu level and go back to the higher menu level

-  to enter the phone numbers or characters available on each key

 besides entering , to scroll down through menu selections,

phonebook positions and EMS messages; to decrease a value; to

increase the pauses (P) and waits (W) in the sequence of DTMF

tones, after entering at least 1 number on stand-by

 besides entering #, to scroll up through menu selections, phonebook

positions and EMS messages; to increase a value; to retrieve the

corresponding phonebook position when preceded by a number; on

stand-by to lock or unlock the keypad

Note: During WAP Internet sessions and when using the T9, some keys

have special functions. Refer to the relevant sections for this.

Note: The GM825 supports a new transmission standard for short text

messages (conventional SMS) that in this manual is referred to as EMS

(Enhanced Messaging Service).