User's Manual

15
P indicates the battery charge: from 3 steady segments (full) to blinking
(discharged). During recharging, the segments in the battery come on
progressively; they stay on steady when the charge is complete
12.00 displays the current time. To adjust the clock, see page 69
f
the ringer is on
U
the ringer is off
Z
] indicates the phone is connected to the battery charger and is
recharging the battery; blinking shows the phone is connected to the
battery charger but the charge is complete
S
indicates a diverted call or alternately:
R
indicates a block on incoming calls or alternately:
Q
the block on outgoing calls has been activated
b
the keypad is locked. To unlock it, hold down , then 
X
indicates a block on some functions: outgoing calls, access to SMS
message functions, phonebook, etc.
a
automatic reply has been turned on
P
roaming is active (the phone is connected on a different GSM network
to the one that issued the SIM card and therefore calls pass through it
with possibly higher costs)
g
indicates the phone is registered on a GSM network that cannot be
used via roaming – only emergency calls are therefore possible
T
when on it indicates the home zone status (refer to your network
operator or service provider for further information) or your own
network after searching for the network from the menu.
F
there is a message in the answering service (function depends on the
SIM card)
During a call, one of the following symbols appears on the display:
N
indicates an active outgoing call
O
indicates an active incoming call
V
indicates an outgoing call on stand-by (hold)
W
indicates an incoming call on stand-by (hold)