User's Manual

19
Note: to be able to take full advantage of this function, put the numbers you
use most in the first 9 positions of the phonebook (see page 31).
Answering a call
When you receive a call, the display blinks >>CALL<< and the phone starts to
ring (if the ringer is on). If the caller can be identified, the display shows their
phone number (or name, if this has been saved in the phonebook).
To answer, press

; To turn off the ringer without rejecting the call

G or

K to reject the call.
Press

K to end the conversation.
Automatic answer
a
If this function has been activated (Menu 5-5-2), it is possible to answer
incoming calls after approximately 6 seconds without pressing any keys.
Answer calls by pressing any key
If this function has been activated (Menu 5-5-3), it is possible to answer
incoming calls by pressing any key (except for ,  and ).
Quickly turning off the ringer
Holding down  turns off the phone's ringer (the display will show U
UU
U): Only
the messages on the display and possibly a blinking light (when not disabled
in menu 5-1-2-1) warn of an incoming call. Hold down this key to turn the
ringer back on.
Note: This selection is not saved when switching off. If you want the ringer
never to ring, you need to set the ringer volume onto “Off” in the specific menu
(4-1-2-1).
Information on missed calls
The message on the display in stand-by “N. X missed” (where X is the
number of calls missed) indicates that the phone memory contains information
on unanswered calls.
Press  to access the information on missed calls: number of calls in
memory and, when available, the phone number (or name if recorded in the
phonebook), date and time of the call.
Pressing  again automatically calls the indicated phone number
(if available).